Our Product

granulated zinc smelter slag

UG-Mat Nonferrous Slags Recycled Materials Resource Center

Zinc Slag Although studies performed in Oklahoma for four types of zinc smelter wastes (fine slags) indicate that they are suitable for use as fine aggregate in hot mix asphalt concrete, (8) no North American documentation was identified regarding the use of zinc or lead slags in asphalt paving. A road trial completed in the United Kingdom

More

Use of granulated slag from lead and zinc processing in

Sep 01, 1996· The possibility of using granulated slags resulting from the smelting of lead and zinc in partial, or total replacement of sand in mortars and concretes, has been examined. The major components of these vitreous slags are Ca, Si, Fe and Al compounds with lead concentration of

More

Effect of granulated lead smelter slag on strength of fly

May 15, 2015· Granulated lead smelter slag is an effective supplementary cementitious material. • Particle size has significate influence on compressive strength. • Mechanical properties of concrete with slag are similar to those with fly ash. • The addition of lead smelter slag results in a decrease of the drying shrinkage.

More

The Solidification of Lead-Zinc Smelting Slag through

Lead-Zinc Smelting Slag (LZSS) is an industrial waste produced during the smelting of lead (Pb) and zinc (Zn) from their ores. It is considered hazardous waste as to it contains a number of heavy metals including Pb, Zn, Cu, Mn, Cr, Cd and Ni etc.

More

(PDF) Reuse of Slags Containing Lead and Zinc as Aggregate

As previously discussed, Zn slag from the Hegeler smelter in Illinois that was used as fill for private drives, roadways and railways has contaminated residential soils with some trace elements

More

Recovery of recycled zinc by slag fuming at the Rönnskär

Fayalite slag from the Electric Smelting Furnace (ESF) at the Rönnskär Smelter is treated batch wise in a fuming furnace to recover zinc. Secondary Zn-rich materials are recycled both in the ESF

More

Smelting Furnace an overview ScienceDirect Topics

About 13% of the global production of zinc is carried out using an imperial smelting furnace process, and consequently the smelting furnace slag generation per year is limited (~1 Mt). 85 The 2003 generation of imperial smelting furnace slag in some European countries was: UK 80,000 t, Italy 60,000 t, France 100,000 t, and Germany 100,000 t. 85

More

RDU 12 Slag Arrowhead Foundation

The West Stack Slag Site (WSS) consists of two slag piles located in a gulch west of the smelter stack. The estimated amount of slag is about 56,000 cubic yards based on the Record of Decision (ROD); however, according to more recent topographical data, the estimate is closer to 360,000 cubic yards or approximately 540,000 tons.

More

Mineralogy of primary phases in slags and mattes from the

II. After the cessation of smelting activities in the 1950s, new smelters were erected in 1963, consisting of a Cu smelter with reverbatory furnace and a Pb smelter with a shaft furnace. During the 1980s, a Slag Mill was built to re-process old copper reverbatory slags by converter techniques producing granulated slag, which is passed

More

NEW BUSINESS TO REUSE ANACONDA’S SLAG

Granulated Slag Pile, an area of approximately 130 acres located east of Anaconda along Montana Highway 1. This pile consists of an estimated 26.5 million tons of slag, roughly half of the total produced. Over 40 million tons of slag were produced during the 100 years of copper smelting

More

UG-Mat Nonferrous Slags Recycled Materials Resource Center

Zinc Slag Although studies performed in Oklahoma for four types of zinc smelter wastes (fine slags) indicate that they are suitable for use as fine aggregate in hot mix asphalt concrete, (8) no North American documentation was identified regarding the use of zinc or lead slags in asphalt paving. A road trial completed in the United Kingdom

More

Ferrosilicate slag from zinc production as aggregates

ISF slag is a by-product, generated during the primary smelting of zinc ore in a form of blast furnace. It is a granulated, glassy material and has the appearance of dark coloured sand. It typically has a particle size distribution between coarse and fine sand, and a higher specific gravity than sand due to its metal content (Figure 2).

More

Utilization of granulated lead slag as a structural

Aug 24, 2014· Pyrometallurgical processing of lead ores generates large amounts of slag which is stockpiled as chunk or granules. Romanian dump heaps of such slag produced in the period 1972–1998, occupy an area of 4522 m2 and a volume of 6616 m3. To assess the possibility of using this material in road construction, a complex characterisation of this waste has been carried out.

More

granulated slag pictures thgroup

slag, dross, scalings and other waste from the manufacture of iron or steel (excl. granulated slag, waste suitable for the recovery of iron or manganese) 26201100: hard zinc spelter: 26201900: slag, ash and residues containing mainly zinc (excl. hard zinc spelter) 26202100

More

Visualisation and quantification of heavy metal

The Imperial Smelting Furnace (ISF) for producing lead and zinc simultaneously has operated on four continents and in eleven countries from the 1950's. One of the process changes that the ISF introduced was the production of a finely granulated slag waste.

More

NEW BUSINESS TO REUSE ANACONDA’S SLAG

Granulated Slag Pile, an area of approximately 130 acres located east of Anaconda along Montana Highway 1. This pile consists of an estimated 26.5 million tons of slag, roughly half of the total produced. Over 40 million tons of slag were produced during the 100 years of copper smelting

More

FUNDAMENTALS OF ZINC RECOVERY FROM METALLURGICAL

granulated slag (stockpiled in dumps) can be directly charged into the fuming furnace. agents can be delivered to the smelting furnace, also. Zinc and lead oxides contained in the molten bath are reduced to their metals at temperatures of 1400OC to 1500OC, and thus report to the gas phase. The residual, or

More

*EIA Case Study Lead Zinc Impact Assessment

Lead and Zinc Smelter slag resulting from the process will be sold to the cement industry. Oxides will be passed to the zinc plant • Waeltz Clinker’ generates a granulated product, with hard particles not larger than 16 mm and with the following contents: Zn (up to 2%), Cu (2-2.5%), C

More

The microstructure and composition of granulated platinum

well as others at the smelter, have been described in detail [3,4]. The process flow at Waterval Smelter is shown in . Figure 1. This paper describes the latest advances in the microanalysis of granulated primary furnace slag and SCF slag, specifically intgranular ra (i.e., within slag granules) electron probe micro-analysis (EPMA) results.

More

The Smelting Process Sudbury INO

Kristiansand, Norway. Slag from the converter aisle is trans-ported by the Slag Hauler to disposal pits on site. The Acid Plant was commissioned in 1978 as part of the Smelter Environmental Improvement project. The Acid Plant treats the roaster off-gas, capturing the sulphur dioxide (SO 2) and producing a 93% sulphuric acid (H 2 SO 4), which is

More

030308 Secondary zinc production European Commission

In both cases zinc oxide in the slag is reduced to metallic zinc (vapor) by carbon, oxidized by secondary air, and carried out and may have up to 30 % of solid granulated slag or slag skulls added to it. The process D 1.8E-3 120 379 conc. measured at various stacks of an imperial smelter

More

Chapter Four Nonferrous Slag Byproducts Recycled

Roasting, which is heating below the melting point; 2. Smelting, which melts the roasted material; and 3. Converting, where the metal is separated from purities. Phosphorous, copper, nickel, and zinc slags can be air- cooled or granulated (RMRC 2008a; TFHRC 2009). Often, molten slag

More